شماره مدرك :
11835
شماره راهنما :
10860
پديد آورنده :
شكريان، ريحانه
عنوان :

تحليل ويسكوالاستيك پارچه هاي درزدار تحت بارگذاري ثابت نسبت به زمان

مقطع تحصيلي :
كارشناسي ارشد
گرايش تحصيلي :
تكنولوژي نساجي
محل تحصيل :
اصفهان: دانشگاه صنعتي اصفهان، دانشكده نساجي
سال دفاع :
1395
صفحه شمار :
ده،127ص.: مصور، جدول، نمودار
يادداشت :
ص.ع. به فارسي و انگليسي
استاد راهنما :
مهدي حجازي، محمد شيخ زاده
توصيفگر ها :
روش باقي مانده هاي متوالي , خزش پذيري
استاد داور :
سعيد آجلي، افسانه ولي پوري
تاريخ ورود اطلاعات :
1395/09/01
كتابنامه :
كتابنامه
دانشكده :
مهندسي نساجي
كد ايرانداك :
ID10860
چكيده فارسي :
بررسي تأثير ويژگيها درز بر خواص خزشي پارچه درزدار بررسي تغييرات در پاسخ الاستيك لحظها بررسي تغييرات در پاسخ ويسكوز نمونهها بررسي تغييرات در خزش قابل بازگشت با تاخير زماني صحت سنجي مدلها ارائه شده فصل چهارم نتيجه گير كلي و پيشنهادات مقدمه خلاصه نتايج محدوديتها پروژه پيشنهادات پيوست پيوست پيوست پيوست منابع چكيده
چكيده انگليسي :
۶ 29 Mukhopadhyay A Relative Performance of Lockstitch and Chainstitch at the Seat Seam of Military Trouser Journal of Engineered Fibers and Fabrics Vol 3 No 1 pp 21 24 2008 Abstract Viscoelastic properties in textiles lead to time dependent behavior such as creep Many applications of technical textiles such as parachutes tents balloons incomat escape chutes inflatable boats air bags and filters are subjected to constant loading conditions The seam is especially useful in such textiles which affects the fabric time dependent behavior because of stress concentration in seam area Therefore only analyzing viscoelastic behavior of fabric in a seamed structure is not enough and it is necessary to analyze the viscoelastic behavior of sewn seamed fabric Hence considering the effect of different seam characteristics such as type of sewing thread type of seam stitch and etc is important The aim of this research is therefore to study the creep behavior of seamed fabrics with different seam characteristics using eleven experiments by means of experimental design Variables are three types of seams SS LS and BS two types of stitches 301 lockstitch and 401 chain stitch three levels of stitch density 4 8 and 12 stitch per inch SPI as well as three kinds of sewing thread including polyester cotton polyester and metallic thread that sewn with three levels of sewing thread tension low medium and high The samples were tested under constant load then creep compliance was calculated for all samples In addition constants of viscoelastic model were calculated for each sample by using successive residual method The results indicate the possibility of describing viscoelastic behavior of seamed fabric by using Burgers model a subset of the generalized model In the following instantaneous strain viscose strain and retarded strain in samples were analyzed The results show that instantaneous elastic behavior in viscoelastic materials is highly dependent on the seam characteristics Changing the sewing
استاد راهنما :
مهدي حجازي، محمد شيخ زاده
استاد داور :
سعيد آجلي، افسانه ولي پوري
لينک به اين مدرک :

بازگشت