<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Ichnovirus infection of an established gypsy moth cell line
2
Identification and Quantification in Multivariate Quality Control Problems
3
Identification of stable systems
4
If R[X] is noetherian, R contains an identity
5
II.Investigation of variables in the metal and in the electrolyte which control pit initiation
6
Impact effects of biped contact with the environment
7
Impact excitation of concrete highway bridges
8
Impact of a Natural Enemy Overwintering Refuge and Its Interaction with the Surrounding Landscape
9
Impact of pressure on leakage rates in water distribution systems
10
Impact of uncertainty in soil, climatic, and chemical information in a pesticide leaching assessment
11
Impact-abrasion behavior of low alloy white cast irons
12
Impedance Control: An Approach to Manipulation: Part III-Applications
13
Impedance Control: An Approach to Manipulation: Part II-Implementation
14
Impedance Control: An Approach to Manipulation: Part.I-Theory
15
Implementation and adaptation of conservation practices
16
Implementation and adaptation of conservation practices
17
IMPLEMENTATION OF A NOVEL TURN ON TURN OFF PASSIVE LOSSIESS SNUBBER.
18
Imporatant factors influenving water infiltration and sediment production on arid lands in New Mexico
19
Importance of the size of the unit in models of ordering behavior for albite
20
Improved adiabatic calculation of muonic-hydrogen-atom cross sections. I. isotopic exchange and elastic scattering in asymmetric collisions
21
Improved corresponding states principle for the noble gases
22
Improved corresponding states principle for the noble gases
23
Improved design procedures for vertically loaded H-piles in sand
24
Improved line heat source thermal conductivity probe
25
Improved Nth Order Averaging Theory for Periodic Systems
26
Improvement of DC coloring of anodized aluminium with use of certain diphenylmethane derivatives
27
Improvement of Metal Recovery By Electrodialysis
28
Improvement of technology for fluxing and quenching of strip in electrolytic tinning unit
29
Improvements in or Relating to Process of Electrolytically Producing Oxide Coatings on Aluminium and Aluminium Alloy Articles
30
Improvements in Production of Shaped Articles Such as Filaments from Polyamides
31
Improvements in the Manufacture of Synthetic Linear Polyamides and Apparatus Therefor
32
Improvements in the Polishing of Aluminium and Alloys Thereof
33
Improving Mixing Quality with Dispersions
34
Improving Nylon Dyeability by Using Redox Systems
35
Improving tensile strength and bend ductility of titanium/AISi 304L stainless steel friction welds
36
Improving the Efficiency of Tabu Search for Machine Sequencing Problems
37
Improving the mechanical properties of anodic oxide films on aluminium utilizing Mo-Oxyhydroxide films
38
IMPROVING THE TRIOLOGICAL BEHAVIOUR OF COPPER THROUGH NOVEL Ti- Cu INTERMETALLIC COATINGS
39
Incidence and compatibility of nonclavicipitaceous fungal endophytes in festuca and lolium grass species
40
Inclusions in three S-type granites from southeastern australia
41
Incompressible Flow Computations With Stabilized Bilinear and Linear Equal-Order-Interpolation Velocity-Pressure Elements
42
Independent elements, integrally closed ideals and quasi-unmixedness
43
Indirect determination of surfactants by adsorptive stripping voltammetry
44
Inductance measurements of HTSC films with high critical currents
45
Induction and termination of diapause in orius predatory bugs
46
Induction Hardening of Ductile Cast Irons
47
Induction of enzymes associated with lysigenous aerenchyma formation in roots of Zea mays during hypoxia or nitrogen starvation
48
Industrial adaptive controllers based on frequency response techniues
49
Inelastic initial local buckling of plates with and without residual stresses
50
Inelastic initial local buckling of plates with and without residual stresses
51
Inelastic local buckling of plates and plate assemblies using bubble functions
52
Inelastic local buckling of plates using bubble functions
53
Inertia-friction welding of particulate-reinforced aluminum composites
54
Infiltration and Redistribution of Organic Liquids in Layered Porous Media
55
INFILTRATION IN CRACKING CLAY SOILS AS AFFECTED BY INITIAL SOIL MOISTURE CONTENT
56
Infiltration percolation for reclaiming stabilization pond effluents
57
Influence microstructure on the physical properties of concrete prepared by substituting mineral powder for part of fine aggregate
58
Influence of Added Manganese, Zinc, and Calcium Level on Egg Shell Quality
59
Influence of aggregate size and water content on compactability of soil using short-time static loads
60
Influence of b-glucanase on feeding value of barley for poultry and moisture content of excreta
61
Influence of Calcium Treatment on Golden Deliciousʹ Apple Quality
62
Influence of chemical Composition on the Strength of Austempered Duction Iron
63
Influence of Different Programmes of Pest Control on Occurrence of Fruit Tree Red Spider Mite (Panonychus Ulmi Koch.), Predatory Mites (Phytoseiidae, Stigmaeiidae) and Apple Rust Mite (Aculus Schlechtendali Nal.) in an Apple Orchard
64
Influence of Electric Arc Furnace Pressure on Power Consumption
65
Influence of electroless nickel-coatings on the fatigue and wear behaviour of mild steels
66
Influence of Erbium and Yttrium Additions On the Microstructure and Mechanical Properties of Titanium Alloys
67
Influence of grain processing on in vitro enzymatic starch digestion of bariey and sorghum grain
68
Influence of heat treatment on the properties of short - fibre - reinforced magnesium composites
69
Influence of hole filling and pair reaking by Pr and hole doping by Ca on superconductivity and flux pinning of YBa2Cu3O6.83
70
Influence of hot Strip Rooling Parameters on Austentite Recrystallization in Interstitial Free Steels
71
Influence of increasing dietary dietary cation - anion balance on the performance of lactating dairy cattle
72
Influence of industrial effluence of the selenga pulp and paper mill on soil and plants
73
Influence of Initial Curing on Sulphate Resistance of Blended Cement Concrete
74
Influence of Long-Term Aging and Superimposed Creep Stress on the Microstructure of 2.25Cr-1Mo Steel
75
Influence of Manuring on Certain Soil Physical Properties in the Middle Awash Area of Ethiopia
76
Influence of metakaolinization temperature on the formation of zeolite 4A from kaolin
77
Influence of miscibility on the morphology and properties of polycarbonate/(maleic anhydride) grafted-polypropylene blend
78
Influence of PH a d Salt Concentration on Protein Solubility, Emulsifying and Foaming Properties of Sesame Protein Concentrate
79
INFLUENCE OF PLASMA AND GAS NITRIDING ON FATIGUE RESISTANCE OF PLAIN CARBON(CK45) STEEL
80
Influence of sampling date and position in the tree on mineral nutrients, maturity and gel breakdown in cold stored Songold plums
81
Influence of seed roasting process on the changes in composition and quality of sesame (sesame indicum) oil
82
Influence of Slag Composition and Temperature on Slag Foaming
83
Influence of soil-water suction on some mechanical properties of soils
84
Influence of Spinel Additives on High-Alumina/Spinel Castables
85
Influence of Stress State on Abrasive Wear of Steels
86
Influence of Temperature and Light Intensity on Absorption Translocation and Phytotoxicity of Fenoxaprop-EthyI and Imazamethabenz-MethyI in Avena Fatua
87
Influence of temperature on the microstructure and properties of chromium electrodeposits
88
Influence of temperature polarization on separation by membrane distillation
89
Influence of the nitric acid concentration on coupled electrochemical reactions in the chemical polishing of aluminum
90
Influence of the steelmaking conditions on nonmetallic inclusions and product defects
91
Influence of the support on the activity and selectivity of high dispersion Fe catalysts in the fischer-tropsch reaction
92
Influence of thermal stratification on the behaviour of a deep wastewater stabilization pond
93
INFLUENCE OF TREATED WASTEWATER AND IRRIGATION SYSTEMS ON SOIL PHYSICAL PROPERTIES IN ISFAHAN PROVINCE
94
Influence of twist and mercerization treatment on characteristics of ring- and rotor-spun yarns
95
Influence of Two Spraying Programmes on Occurrence of Some Pests and Predatory Mite Typhlodromus Pyri Scheut. (Phytoseiidae) in an Apple Orchard
96
Influence of Volatile Hydride-Forming Elements on Antimony Determination by Atomic-Absorption Spectrometry with Hydride-Generation
97
Influence of water activity temperature and incubation time on the accumulation of aflatoxin B1 in soybeans
98
Influences of age ,sex and type of dietary fat supplementation on total carcass and fatty acid composition
99
Influences of the precursor powder on the microstructure of HTSC-tapes
100
Infrared Method for Determination of o-,m-, and p-Mononitrotoluene and 2,4-Dinitrotoluene in Mixtures
101
Infrarotpektreskopische untersuchungen an aromatischen sulfochloriden
102
Inheritance and fatty acid composition of a yellow-embryo mutant in turnip rape (brassica campestris L.)
103
INHIBITION EFFECTS OF FURFURAL ON ALCOHOL DEHYDROGENASE, ALDEHYDE DEHYDROGENASE AND PYRUVATE DEHYDROGENASE
104
Inhibition of photosynthesis by carbohydrates in wheat leaves
105
Initial growth and epitaxy of PVD TiN layers on austenitic steel
106
Injective modules for uniform algebras
107
Injective modules over noetherian rings
108
Innovative Separation Process
109
Innovative technology for citrus cultivar improvement
110
Inorganic photochemistry-state of the art
111
In-ovulo embryo culture and seedling development of cotton (Gossypium hirsuium L.)
112
Insecticidal 4-alkylidene-1,3,2-benzodioxaphosphorinane derivatives
113
Insects as biochemical models
114
Instantaneous evaluation of inclusion quantity of liquid aluminum alloys
115
Instrumentation of a Multicomponent Sensor
116
Instrumenting hard rock tunnels for a test facility
117
Integrated control of the long-tailed mealybug, pseudococcus longispinus ....
118
Integrated Topology and Boundary Shape Optimization of 2-D Solids
119
Integrating CAD/CAM of forging dies with finite element simulation of metal flow in an intelligent knowledge based system
120
Intensity of hydrogen trapping in pure AI,AI-4wt►Cu and AI-1wt►Mg2Si alloys measured by tritium release
121
Interaction between carbonate rock and cement paste
122
Interaction of hydrophobic anions with cationic dyes and its application to the spectrophotometric determination of anionic surfactants
123
Interactions between fungal pathogens and insect hosts
124
Interactions between fungal pathogens and insect hosts
125
Interchain crosslinking between NBR and hypalon rubber and its effect on processibility and extrudate morphology
126
Interfacial heat transfer coefficients of various vapors in direct contact condensation
127
Interfacial layers formed during the moulding of nitrile butadiene rubber compounds: influence of carboxylic acid residues on adhesion
128
Interference coloring of dual-anodized films on aluminum containing electrolytically deposited thin metal layers
129
Internally amplified ramman spectroscopy
130
Interpretation of analytical chemical information by pattern recognition methods- a survey
131
Interrelation Between Dyeing and Thermal Properties of PET Fibers
132
Intra-Set Point Generation and Filtering in Decision and Criterion Space
133
Intrinsic Birefringence of Poly(Trimethylene Terephthalate)
134
Introduction in industry of duplex treatment consisting of plasma nitriding and PVD deposition of TiN
135
Introduction to inorganic photochemistry: principles and methods
136
Investigation of Arc Force Effects in Subsurface Gta Welding
137
Investigation of electroless Ni-P-Sic composite coatings
138
Investigation of melting by molecular dynamics simulation
139
Investigation of metal flow in open-die forging with different die and billet geometries
140
Investigation of some reguarities for dense fluids using a simple equation of state
141
Investigation of some regularities for dense fluids using a simple equation of state
142
Investigation of Subsolidus Weld Cracking in Alpha-Beta Titanium Alloys: of Several Alpha-Beta Alloys Investigated Ti-6211 Was Found to be Susceptible to Subsolidus Weld Cracking
143
Investigation of the Composition of Ag, Ni and Ag-Ni Pseudo-Alloy Coatings Applied by Electrospark Alloying on a Cu Substrate
144
Investigation of the Effect of Welding Parameters on Weld Quality of Plasma Arc Keyhole Welding of Structural Steels: A study Shows That in Order to Get the Highest Quality Welds There Is a Narrow Allowable Range of Variations in the Plasma ...
145
Investigation of the Mechanism of Inhibitor Action in Copper Electrorefining. Phenomenon of Slow Rhythmic Oscillation of Cathode Potential
146
Investigation of Y-Fe intermetallic compounds using NMR, magnetization and curie point ...
147
Investigation on adsorption stripping potentiometry part III. theory of derivative adsorption potentiometry for a reversible reaction
148
Investigations of Dioximes and Their Metal Complexes
149
Investigations on Thermal and Hydrolytic Degradation of Poly (Ethylene Terephthalate)
150
Investment Casting Mould
151
Invited Review Absorption of NOx Gases
152
Ion Exchange Membranes with Preferential Permselectivity for Monovalent Ions
153
Ion-Exchange Equilibria Involving Complex Formation in Aqueous Solution
154
Ioning out a Short Life for Tooling
155
Ion-Selective Electrode for Serum Bromide Assay in Patients With Epilepsy
156
Iranian Flat Breads: Relative Bioavailability of Iron
157
Iron hydroxides as macftic scavencers
158
Iron-pentasil molecular sieves: characterisation and catalytic behaviour in syngas conversion
159
Irradiation performance of modified 316 stainless steel for monju fuel
160
Irrigation and dryland cultivation effects on the surface properties and erodibility of a zimbabwe vertisol
161
Irrigation of vegetable crops as a means of recycling wastewater: applied to hesbaye frost
162
Is regression what you really want
163
Isolation and characterization of a member of the cysteine-rich gene family from Campoletis sonorensis polydnavirus
164
Isolation and characterization of dorin M, a lectin from plasma of the soft tick ornithodoros moubata
165
Isolation and growth of a pseudomonas species that utilizes cyanide as a source of nitrogen
166
Isolation of microorganisms with lignin transformation potential from soil of tenerife island
167
Isolation, identification, and synthesis of miriamides, new hostmarkers from eggs of pieris brassicae
168
Isothermal Reduction of Coal Mixed Iron Oxied Pellets
169
Isothermal Swell of Extrudate from Annular Dies;Effects of DieGeometry...
170
Isozyme Markers in Rice: Genetic Analysis and Linkage Relationships
171
ITS-2 sequences do not differ for the closely related species trichogramma minutum and T. platneri
