<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Fabrication and High-Temperature Phase Stability of MO(AL,Si)2-MOSi2 Intermetallics
2
Fabrication of electrically conductive metal oxide coatings by reactive ion plating
3
Facial (syn-anti) stereoselectivity in the diels-alder reactions of spiro(bicyclo[2,2,2]octane-2,1-[2,4]cyclopentadiene)
4
Facile direct -oxidation of ketones using t-butyl thionitrate
5
Facilitated transport of 7-aminocephalosporanic acid in a bulk liquid membrane
6
Factorization of the Radial Equation for the Hydrogen Atom
7
Factors affecting glucosidase and galactosidase activities in soils
8
Factors affecting survival, migration of spermatozoa and of ovipositon in instrumentally inseminated queen honeybees
9
Factors affecting the formation of anodic oxide coatings
10
Factors affecting the strength of undisturbed cores from soils with low structural stability
11
Factors affecting the tensile strength of soil aggregates
12
Factors affecting wage rates among bakery workers in the city of isfahan, Iran
13
Factors influencing T in 123 copper-oxide superconductors
14
Factors influencing the adhesion of diamond coatings on cutting tools
15
Factors influencing the precision of soil seed bank esitmates
16
Factors influencing the preferential orientations in Zinc coatings electrodeposited from chloride baths
17
Fagotage et pilosite du fil open-end
18
Failure of lacey V. murrow floating bridge, seattle, washington
19
Failure time models with matched data
20
Families of Periodic Orbits:Virtual Periods and Global Continuability
21
fat in lactation rations:review
22
Fate of cyanide and related compounds in aerobic microbial systems
23
Fate of cyanide and related compounds in aerobic microbial systems-II.Microbial degradation
24
Fatigue behaviour of short alumina fibre reinforced AZ91 magnesium alloy metal matrix composite
25
Fatigue growth prediction of internal surface cracks in pressure vessels
26
Fatty acid composition of bovine intramuscular and subcutaneous FAT as related to breed and sex
27
Fatty acid oxidation of pistachio nuts stored under various atmospheric conditions and different temperatures
28
Fe simulation of the development of flaws during injection forging
29
Feasibility of brazing and welding alumir um-graphite composites
30
Feather fiber reinforced concrete
31
Feed intake, apparent diet digestibility, and rate of particulate passage in dairy cattle
32
Feeding value of dried lime pulp in broiler diets
33
Fermentation properties of intestinal strains of lactobacillus of a sour dough and of a yoghurt starter culture in an oat-based nutritive solution
34
Fermented oatmeal soup-influence of additives on the properties of a nutrient solution for enteral feeding
35
Ferrocement canal lining
36
Fiber Composite Thin Shells Subjected to Thermal Buckling Loads
37
Fibre bond strengths in cement and concrete
38
Field evaluation of soil tests for K. :quantity,intensity,EUF-K and other soil properties
39
Field studies of the overland flow process for the treatment of raw and primary traeted municipal wastewater
40
Field studies oof rainsplash erosion
41
Fifty years progress in soil physics
42
Filament Yarn from PET Bottles
43
Filler dispersions in elastomers studies with imaging techniques
44
Film thickness in blade coating of viscous and viscoelastic liquids
45
Filter-paper method for routine measurement of field water potential
46
Finite Element Analysis of Intrumented Geogrid Reinforced Slope
47
Finite Element Calculation of Three-Dimensional Hot Forging
48
Finite Element Modeling of Frequency-Dependent Material Damping Using Augmenting Thermodynamic Fields
49
Finite-difference energy models versus finite-element models: two variational approaches in one computer program
50
Finite-element simulation of axisymmetric preforms in precision foging at elevated temperatures
51
Fiscal policy and aggregate demand:comment
52
Fischer-tropsch reaction studies with supported ruthenium catalysts
53
Fischer-tropsch reaction studies with supported ruthenium catalysts III. the production of alkenes and high molecular weight hydrocarbons in a fixed bed reactor
54
Fischer-tropsch synnthesis:incorpoation of C-labeled normal and isoalcohols
55
Fischer-tropsch synthesis in stirred tank slurry reactor
56
FIscher-tropsch synthesis with an iron catalyst: incorporation of ethene into higher carbon number alkanes
57
Fischer-Tropsch synthesis with iron catalysts,Impact of alkali or added alcohol upon catalytic activity and product selectivity
58
Fischer-Tropsch synthesis: comparison of 14 C distributions when labeled alcohol is added to the synthesis gas
59
Fish imagery in art 82: Jonah and the fish
60
Fitoderm: squalane extracted from olive oil
61
Fixed bed and slurry reacto studies of fischer-tropsch synthesis on precipitated iron catalyst
62
fixed-bed reactor successful in fuels from coal synthesis
63
Flavonoids recovery and SCP production from orange peel
64
Flexural vibration of an infinite wedge
65
Flight and landing behavior of trypodendron lineatum (coleoptera: scolytidae)in response to different semiochemicals
66
Flight behavior of scolytid beetle in reponse to semiochemicals at different wind speeds
67
Flight behavior of scolytid beetle in response to semiochemicals at different wind speeds
68
Floating bridge approach span construction
69
Flow injection analysis for beryllium determination with chrome azurols as chromogenic agent
70
Flow injection spectrophotometric determination of ultra trace amounts of selenium (IV)
71
Flow of Heat From Sand Castings by Conduction, Radiation, and Convection
72
Flow over an obstacle emerging from the wall of a channel
73
Flow over sharp-crested plate weirs
74
Flow-injection determination of traces of formaldehyde by the brilliant green-sulphite reaction with spectrophotometric detection
75
Flow-injection spectrophotmetric determination of hydrazine
76
Fluid Flow and Heat Transfer in a Laminar Radial Impinging Jet
77
Fluorescence in pistachio nuts contaminated with aflatoxin
78
Foam as a tunnelling aid: its production and use
79
Food production and the role of small family farms
80
Forced Coil Cooling for Optimized Coil Storage and Transportation
81
Forces on vertical cylinder due to random waves
82
forecasting wheat yields: an application of parametric time series modeling
83
Forging preform design with shape complexity control in simulating backward deformation
84
Formability in extrusion forging: the influence of die geometry and friction conditions
85
Formation and observation of ultrafine particles
86
Formation of a phosphaferracyclopentadiene ring by coupling of a phosphaalkyne with two fluoromethylidyne ligands
87
Formation of Aluminium Oxynitride by Carbothermal Reduction of aluminium Oxide in Nitrogen
88
Formation of polypyrrole coatings onto low carbon steel by electrochemical process
89
Formation of spheroidal carbide in vanadium white cast iron by rate earth modification
90
Formation of vinblastine in multiple shoot culture of catharanthus roseus
91
Formulation of multi-branch lumped parameter torsional vibratory systems via rectilinear modelling
92
Fortification of Pasta with Pea Flour and Air-Classified Pea Protein Concentrate
93
Four-Level Orthogonal Array Design As a Chemometric Approach to the Optimization of Polarographic Reaction System for Phosphorus Determination
94
Fracture at elevated temperatures in a particle reinforced composite
95
Fracture mechanics studies on concrete compounds
96
Fracture toughness and thermal resistance of polycrystalline diamond compacts
97
Free Radical Grafting of Glycidyl Methacrylate onto Polypropylene in a Co-Rotating Twin Screw Extruder
98
Free volume,entropy,and Relaxation Phenomena
99
Fretting wear and fretting fatigue properties of electroless nickel-phosphorus coatings
100
Friction and wear characteristics of electroless Ni-P-PTEE composite coatings
101
Friction and wear of chromium and nickel coatings
102
Frictional and structural characterization of ion - nitrided low and high chromium steels
103
Frictional Behavior of Electrogalvanized Sheet Steels
104
Fullerene derivatives. comparative theoretical study of C60O and C60CH2
105
Fully integrated continuous process results in biodegradable alcohols which can be used for detergent production
106
Functional (breadmarking) and compositional characteristics of iranian flat breads
107
Functional characterization of milk component:soy isolate blends
108
Functional development of rumen mucosa. II. metabolic activity
109
Functional responese and host preference of encarsia formosa gahan (Hym., Aphelinidae), a parasitoid of greenhouse whitefly T. vaporariorum (Westwood) (Hom.,Aleyrodidae)
110
Functional significance of parasitism-induced suppression of juvenile hormone esterase activity in developmentally delayed choristoneura fumiferana larvae
111
Functionalization of an Amorphous Ethylene-Propylene Copolymer by free Radical Initiated Grafting of Unsaturated Molecules
112
Functionalization of phenyl rings by imidoylnitrenes
113
Functionalization of phenyl rings by imidoylnitrenes. 2. Cycloaddition or electrophilic aromatic substitution?
114
Fundamental Mechanisms of Pore Formation in Iron Ore Sinter and Pellets
115
Fundamental mechanisms of titanium nitride formation by d.c. magnetron sputtering
116
Fundamentals and applications of supercritical fluid extraction in chromatographic science
117
Further Improvements in Isomerization of Olefins in Solvent-Free Conditions
118
Further studies with hens producing a high incidence of non-caleified or partially calcified egg shells
119
Future outlook for world food production
120
Fuzzy classification methods for determining land suitability from soil profile observations and topography
121
Fuzzy Reliability Modeling of Gracefully Degradable Computing Syatems
122
Fuzzy Topological Orderd Vector Spaces I
123
Fuzzy Topological Vector Spaces I
124
Fuzzy Topological Vector Spaces- Topological Generation and Normability
125
Fuzzy Topology on Fuzzy Sets and Tolerance Topology
126
Fuzzy Vector Spaces
